About machine customisation

This page explains machine customisations with MAAS. Prior to deployment, MAAS machines can be customised in a number of ways, including:

  • machine storage.
  • commissioning and deployment configurations (known as “pre-seeding”).
  • custom Ubuntu kernels.
  • kernel boot options.
  • resource pools.

In MAAS v3.2 and higher, machines can also be customised post-deployment, while running, either by changing out the physical hardware, or by altering the VM from the VM host side. This will allow you to:

  • add or remove disks
  • add or remove network interfaces
  • add or remove PCI devices
  • add or remove USB devices

You cannot update these parameters from within MAAS on a deployed machine.

While deploying a machine, you can configure that machine to periodically sync its hardware configuration. Deployed machines will passively update changes to the BMC and tags for that machine, on-the-fly, as these changes are made.

This section will explain these possible customisations, and provide detailed instructions on how to customise your own machines as desired.

Customising storage

You have significant latitude when choosing the final storage configuration of a deployed machine. MAAS supports traditional disk partitioning, as well as more complex options such as LVM, RAID, and bcache. MAAS also supports UEFI as a boot mechanism. This article explains boot mechanisms and layouts, and offers some advice on how to configure layouts and manage storage.

MAAS doesn’t currently support deploying with ZFS for devices other than the root one. For this reason, ZFS is not recommended.

A machine’s storage is dependant upon the underlying system’s disks, but its configuration (i.e., disk usage) is the result of a storage template. In MAAS, this template is called a layout, and MAAS applies it to a machine during commissioning. Once a layout is applied, a regular user can make modifications to a machine at the filesystem level to arrive at the machine’s final storage configuration. When a machine is no longer needed, a user can choose from among several disk erasure types before releasing it.

MAAS supports storage configuration for CentOS and RHEL deployments. Support includes RAID, LVM, and custom partitioning with different file systems (ZFS and bcache excluded). This support requires a newer version of Curtin, available as a PPA^.

UEFI booting

Every layout type supports a machine booting with UEFI. In such a case, MAAS automatically creates an EFI boot partition (/boot/efi). Other than setting the machine to boot from UEFI, the user does not need to take any additional action.

UEFI must be enabled or disabled for the lifespan of the machine. For example, do not enlist a machine with UEFI enabled, and then disable it before commissioning. It won’t work!

The EFI partition, if created, will be the first partition (sda1) and will have a FAT32 filesystem with a size of 512 MB.

Block devices

Once the initial storage layout has been configured on a machine, you can perform many operations to view and adjust the entire storage layout for the machine. In MAAS there are two different types of block devices.

*Physical

A physical block device is a physically attached block device such as a 100GB hard drive connected to a server.

*Virtual

A virtual block device is a block device that is exposed by the Linux kernel when an operation is performed. Almost all the operations on a physical block device can be performed on a virtual block device, such as a RAID device exposed as md0.

Partitions

As with block devices (see Block devices), MAAS and the MAAS API offer a great deal of control over the creation, formatting, mounting and deletion of partitions.

Storage restrictions

There are three restrictions for the storage configuration:

  1. An EFI partition is required to be on the boot disk for UEFI.
  2. You cannot place partitions on logical volumes.
  3. You cannot use a logical volume as a Bcache backing device.

Violating these restrictions will prevent a successful deployment.

VMFS data stores

MAAS can configure custom local VMware VMFS Datastore layouts to maximise the usage of your local disks when deploying VMware ESXi. As VMware ESXi requires specific partitions for operating system usage, you must first apply the VMFS6 storage layout. This layout creates a VMFS Datastore named datastore1 which uses the disk space left over on the boot disk after MAAS creates the operating system partitions.

Final storage mods

Once MAAS provisions a machine with block devices, via a layout or administrator customisation, a regular user can modify the resulting storage configuration at the filesystem level.

Disk erasure

Disk erasure pertains to the erasing of data on each of a machine’s disks when the machine has been released (see Release action back into the pool of available machines. The user can choose from among three erasure types before confirming the Release action. A default erasure configuration can also be set.

Erasure types

The three disk erasure types are:

  1. Standard erasure - Overwrites all data with zeros.
  2. Secure erasure - Although effectively equivalent to Standard erase, Secure erase is much faster because the disk’s firmware performs the operation. Because of this, however, some disks may not be able to perform this erasure type (SCSI, SAS, and FC disks in particular).
  3. Quick erasure - Same as Standard erase but only targets the first 1 MB and the last 1 MB of each disk. This removes the partition tables and/or superblock from the disk, making data recovery difficult but not impossible.

If all three options are checked when the machine is released, the following order of preference is applied:

  1. Use ‘secure erase’ if the disk supports it
  2. If it does not, then use ‘quick erase’

It is very important to pay close attention to your selections when erasing disks.

Pre-seeding

During machine enlistment, deployment, commissioning and machine installation, MAAS sends Tempita-derived^ configuration files to the cloud-init^ process running on the target machine. MAAS refers to this process as preseeding. These preseed files are used to configure a machine’s ephemeral and installation environments and can be modified or augmented to a custom machine configuration.

Preseeding in MAAS can be achieved in two ways:

  1. Curtin^, a preseeding system similar to Kickstart or d-i (Debian Installer), applies customisation during operating system (OS) image installation. MAAS performs these changes on deployment, during OS installation, but before the machine reboots into the installed OS. Curtin customisations are perfect for administrators who want their deployments to have identical setups all the time, every time. This blog post^ contains an excellent high-level overview of custom MAAS installs using Curtin.

  2. Cloud-init^, a system for setting up machines immediately after instantiation. cloud-init applies customisations after the first boot, when MAAS changes a machine’s status to ‘Deployed.’ Customisations are per-instance, meaning that user-supplied scripts must be re-specified on redeployment. Cloud-init customisations are the best way for MAAS users to customise their deployments, similar to how the various cloud services prepare VMs when launching instances.

Templates (snap)

The Tempita^ template files are found in the /var/snap/maas/current/preseeds/ directory on the region controller. Each template uses a filename prefix that corresponds to a particular phase of MAAS machine deployment:

Templates (deb)

The Tempita^ template files are found in the /etc/maas/preseeds/ directory on the region controller. Each template uses a filename prefix that corresponds to a particular phase of MAAS machine deployment:

Phase Filename prefix
Enlistment enlist
Commissioning commissioning
Installation curtin (Curtin)^

Additionally, the template for each phase typically consists of two files. The first is a higher-level file that often contains little more than a URL or a link to further credentials, while a second file contains the executable logic.

The enlist template, for example, contains only minimal variables, whereas enlist_userdata includes both user variables and initialisation logic.

Tempita’s inheritance mechanism is the reverse of what you might expect. Inherited files, such as enlist_userdata, become the new template which can then reference variables from the higher-level file, such as enlist.

Template naming

MAAS interprets templates in lexical order by their filename. This order allows for base configuration options and parameters to be overridden based on a combination of operating system, architecture, sub-architecture, release, and machine name.

Some earlier versions of MAAS only support Ubuntu. If the machine operating system is Ubuntu, then filenames without {os} will also be tried, to maintain backward compatibility.

Consequently, template files are interpreted in the following order:

  1. {prefix}_{os}_{node_arch}_{node_subarch}_{release}_{node_name} or {prefix}_{node_arch}_{node_subarch}_{release}_{node_name}

  2. {prefix}_{os}_{node_arch}_{node_subarch}_{release} or {prefix}_{node_arch}_{node_subarch}_{release}

  3. {prefix}_{os}_{node_arch}_{node_subarch} or {prefix}_{node_arch}_{node_subarch}

  4. {prefix}_{os}_{node_arch} or {prefix}_{node_arch}

  5. {prefix}_{os}

  6. {prefix}

  7. generic

The machine needs to be the machine name, as shown in the web UI URL.

The prefix can be either enlist, enlist_userdata, commissioning, curtin, curtin_userdata or preseed_master. Alternatively, you can omit the prefix and the following underscore.

For example, to create a generic configuration template for Ubuntu 16.04 Xenial running on an x64 architecture, the file would need to be called ubuntu_amd64_generic_xenial_node.

To create the equivalent template for curtin_userdata, the file would be called curtin_userdata_ubuntu_amd64_generic_xenial_node.

Any file targeting a specific machine will replace the values and configuration held within any generic files. If those values are needed, you will need to copy these generic template values into your new file.

Ubuntu kernels

MAAS supports four types of kernels for its Ubuntu machines:

  • General availability kernels
  • Hardware enablement kernels
  • Hardware enablement kernels (pre-release)
  • Low latency kernels

GA kernels

The general availability (GA) kernel is based on the generic kernel that ships with a new Ubuntu version. Subsequent fixes are applied regularly by the ‘stable’ stream used when setting up the global image source for MAAS.

MAAS denotes a GA kernel like this:

ga-<version>: The GA kernel reflects the major kernel version of the shipped Ubuntu release. For example, ‘ga-16.04’ is based on the ‘generic’ 4.4 Ubuntu kernel. As per Ubuntu policy, a GA kernel will never have its major version upgraded until the underlying release is upgraded.

HWE kernels

New hardware gets released all the time. If an Ubuntu host runs an older kernel, it’s unlikely that MAAS can support the hardware. Canonical does make every effort to back-port more recent kernels enabling more hardware. The acronym HWE stands for “Hardware Enablement.”

You also gain kernel improvements and new features when installing an HWE kernel.

There is the notion of an HWE stack, which refers to the window manager and kernel when the Ubuntu host is running a desktop environment. HWE stacks do not apply to MAAS since machines are provisioned strictly as non-graphical servers.

Note that these back-ported/HWE kernels are only available for LTS releases (e.g. Trusty, Xenial, etc.). For example, the first available HWE kernel for Ubuntu 16.04 LTS (Xenial) will be the GA kernel from Ubuntu 16.10 (Yakkety).

Before MAAS 2.1 on Xenial, HWE kernels are referred to by the notation hwe-<release letter>. So, to install the Yakkety HWE kernel on Xenial, the hwe-y kernel is used. By default, when using the web UI, MAAS imports all available HWE kernels along with its generic boot images. So if you are importing Trusty images, then the following HWE kernels are included: hwe-u, hwe-v, hwe-w, hwe-x (presuming the Xenial HWE kernel is available).

In MAAS 2.1, starting with Xenial kernels, the notation has changed. The following is used to refer to the latest HWE kernel available for Xenial: hwe-16.04.

See LTS Enablement Stack^ (Ubuntu wiki) for the latest information on HWE.

Pre-release HWE

The pre-release HWE kernel is known as the edge HWE kernel.

MAAS denotes the edge kernel like this: hwe-<version>-edge.

So ‘hwe-16.04’ is considered older than ‘hwe-16.04-edge’.

See Rolling LTS Enablement Stack (Ubuntu wiki)^ for more information.

Low-latency kernels

The low-latency kernel is based on the GA kernel, but uses a more aggressive configuration to reduce latency. It is categorised as a soft real-time kernel. For more information, see Criteria for real-time computing^ (Wikipedia).

MAAS denotes a low latency kernel in three ways:

  1. hwe-x-lowlatency: the Xenial low latency HWE kernel for Trusty
  2. ga-16.04-lowlatency: the low latency GA kernel for Xenial
  3. hwe-16.04-lowlatency: the low latency HWE kernel for Xenial

Choosing a kernel

The kernel installed on a machine during deployment is, by default, the Ubuntu release’s native kernel (GA). However, it is possible to tell MAAS to use a different kernel. Via the Web UI, MAAS can help you choose one of these kernels. There are three different contexts for your choice:

  1. globally (default minimum enlistment and commissioning kernel)
  2. per machine (minimum deploy kernel)
  3. per machine during deployment (specific deploy kernel)

Kernel boot options

MAAS can specify kernel boot options to machines on both a global basis (UI and CLI) and a per-machine basis (CLI-only). A full catalogue of available options can be found in the Linux kernel parameters list^ at kernel.org^.

Resource pools

Resource pools allow administrators to logically group resources – machines and VM hosts – into pools. Pools can help you budget machines for a particular set of functions. For example, if you’re using MAAS to manage a hospital data centre, you may want to keep a certain number of machines reserved for provider use, whether that be for the charts, documentation, or orders application. You can use resource pools to reserve those machines, regardless of which of the three applications you end up loading onto a particular machine at any given time.

Administrators can manage resource pools on the Machines page in the web UI, under the Resource pools tab, or with the MAAS CLI. Also note that all MAAS installations have a resource pool named “default.” MAAS automatically adds new machines to the default resource pool.


Last updated a month ago.